How to take care of rabbit hutch cage

(1) The rabbit hutch cage shall be installed on the concrete ground, and the ground shall be kept flat. During installation, the incubator shall be tilted slightly forward (some models are backward) to facilitate the discharge of sewage during cleaning. 2 ~ 3M holding space shall be reserved in front of the door.

(2) The temperature of the rabbit hutch cage should be kept at 20 ~ 27 ℃. When the temperature is higher than 27 ℃ or lower than 20 ℃, air conditioning equipment or other measures should be considered. The humidity should be maintained at about 50%. Good ventilation conditions shall be provided indoors, and the waste gas discharged from the incubator (especially the hatching machine) shall be led to the outside through pipes. The incubator should be cleaned, washed, painted and disinfected frequently. Turning eggs at an angle of 80 ° is the key to improve the hatching rate. The eggs can be turned at an interval of 8 ~ 12 hours during hatching, and the egg turning shall be stopped after moving into the hatching tray 3 days before hatching.
At the later stage of incubation, the lung function of embryonic chicks has been formed, and sufficient oxygen is required. Therefore, there should be a certain space for covering and breeding eggs, and the ventilation times should be increased.

(3) (rabbit hutch cage)After the installation of the whole machine, power on and test the machine, check whether the temperature and humidity control system is normal, and adjust the temperature according to the request. Also check whether the over temperature and low temperature alarm system is faulty, and whether the active and timed egg turning system is normal. After running for 1 ~ 2 days and everything is normal, it can be officially incubated.

(4) Pay attention to the temperature instigated by the thermometer on the door at any time during application. If there is any abnormal phenomenon, check the temperature control system in time to eliminate the fault.